Powder actuated tools for use in attaching conduit clips and electrical fixtures to concrete or steel, and wood to either concrete or steel in residential and commercial applications.   Tools   Display P3600 PA 351 P3801       P3500 PA3500 P35s Powder Merchandiser           P7201 P2201 P1000                   Pins Ballistic Point™ Drive Pin .300 Head Drive Pin .300 Head Drive Pin with Top Hat .300 Head Drive Pin with Washer         10mm Head Drive Pin 8mm Head Drive Pin 8mm Head Drive Pin with Top Hat 8mm Head Drive Pin with 1" Washer         3/8" Head Drive Pin 1/4" - 20 Threaded Stud 3/8" - 16 Threaded Stud Ceiling Clip Assemblies         Ceiling Clip Assemblies for Ladd Tool BX-EMT Conduit Clip Assemblies Rebar Basket Clip Assemblies Forming Pin         Hammer Drive Pin PTZ .300 Head Pin with washer PTZ 8mm Head Pin with washer 8mm Head Drive Pin (PA351, DX350, DX460)                 Loads .22 Caliber "A" Single Load .22 Caliber Single Load for ITW Ramset® Ladd (L1600) .25 Caliber Single Load .27 Caliber Single Long Load           .25 Caliber 10 Load Strip .27 Caliber 10 Load Strip (Purple/Black) .27 Caliber Safety Strips™                   Accessories       Ceiling Clip               Home | About Powers | Products | Locations | Contact Us | Submittals | Approvals | Distributors | Literature | News | Architects, Engineers, Specifiers | MSDS ©2006 Powers Fasteners | 2 Powers Lane | Brewster, NY 10509 | P: (914) 235-6300 | F: (914) 576-6483 All information on this website is copyrighted material, reproduction in any manner whatsoever without written permission of Powers Fasteners is strictly forbidden. 2008-04-21